Repository navigation
More print fixes - #93
Merged
Merged
Conversation
…he PowerPlate The plate had only 0.05 mm to the diagonal slot wall and the inner wall, so it stuck. Cut the TopShell around a copy of the plate grown by 0.3 mm. Re-exports TopShell (STL, STEP, print files, f3d). Co-Authored-By: Claude Sonnet 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_011hGoLJeZxtuwqpPbdX38rp
…dow clearance; raise bottom shell front wall to close gap Inward travel before hard stop ~1.4 mm; no interference with any part. Reprint BumperCap, TopShell, BottomShell. Co-Authored-By: Claude Sonnet 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_011hGoLJeZxtuwqpPbdX38rp
…e top The loose HallBridge plate had no retention. It is now part of BottomShell (top raised to z1.99 so it prints on the bed). The trigger ear's spring-leg channel is open on top so the hooked leg can be dropped in from above. HallBridge is hidden in the Fusion model and obsolete in the print README. Co-Authored-By: Claude Sonnet 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_011hGoLJeZxtuwqpPbdX38rp
… thumbstick bump (TopShell) and the front end (BottomShell) Every buck stands on the bed with no shell material below or within 0.8 mm beside it, so the shell lifts straight off. Verified against the shell mesh: 0 points inside, 0 with shell below, min clearance 0.23 mm. Co-Authored-By: Claude Sonnet 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_011hGoLJeZxtuwqpPbdX38rp
Co-Authored-By: Claude Sonnet 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_011hGoLJeZxtuwqpPbdX38rp
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.