[brosaplanella]

Summary

• Notebooks: all 18 example notebooks are re-run, so their outputs include the packed-bed fix (Make the storage take exactly the flux law's heat at its wall (F-056) #51, F-056). This was the follow-up to that PR.
  • The default Nallusamy charge now stores 2.318 kWh, up from 2.303 kWh (packed_bed_models). The design study's packed bed delivers 1.27 kWh, down from 1.28 kWh, still 52 % of what it stores.
  • The finned-tube outputs move by at most 0.0004 K.
  • Everything else that differs is solve times, round-off in the conservation errors, or object addresses.
• Prose: the packed-bed notebook now gives the fit to the measurements at each height. The fluid temperatures are within 2 K RMS: 0.98, 0.68, 1.41 and 1.85 K at a quarter, half, three quarters and the full height. It used to say "1 K to 2 K", which understated the fit after F-056.
• Other claims checked: the other numbers quoted in the notebook text still hold. The lumped capsule is fully charged after about 105 min, while the resolved bed is not fully charged after 160 min. Jeffreson's correction follows the resolved outlet at first, then charges too slowly. The figures quoted in the advection, validation and design-study notebooks are unchanged.
• compat/coupled.py: the docstring now names [Bug]: resolve_coupled_variables=True breaks for boundary conditions and modifies the input model pybamm-team/PyBaMM#6001 and its fix, PR #6002. That fix must land before PyBaMM can resolve coupled variables by default. The issue asking for that default is still not filed (see Track upstream PyBaMM fixes, towards an empty compat/ #39).

The new runs saved QuickPlot widget state into four notebooks that had none before. I removed it, so each notebook stores the same kind of metadata as before.

Checks

• Every notebook ran without errors, one at a time.
• ruff check and ruff format --check pass on the whole repository, notebooks included.

🤖 Generated with Claude Code

[read-the-docs-community]

Documentation build overview

📚 PyTES | 🛠️ Build #35559784 | 📁 Comparing 07e7c3b against latest (1560e21)

  🔍 Preview build  

13 files changed · ± 13 modified

± Modified

• api/experiments.html
• examples/advection_scheme.html
• examples/composing_models.html
• examples/design_study.html
• examples/experiments.html
• examples/finned_tube_models.html
• examples/lumped_capsule.html
• examples/packed_bed_models.html
• examples/parameter_layers.html
• models/packed_bed.html
• and 3 more...