cli: use operational data in show container [name]

board/common/rootfs/etc/fstab

@@ -1,16 +1,8 @@
 # Virtual filesystems
-devtmpfs	/dev		devtmpfs	defaults		0	0
-mkdir#-p	/dev/pts	helper		none			0	0
-devpts		/dev/pts	devpts		mode=620,ptmxmode=0666	0	0
-mkdir#-p	/dev/shm	helper		none			0	0
-tmpfs		/dev/shm	tmpfs		mode=0777		0	0
-proc		/proc		proc		defaults		0	0
-tmpfs		/tmp		tmpfs		mode=1777,nosuid,nodev	0	0
-tmpfs		/run		tmpfs		mode=0755,nosuid,nodev	0	0
-tmpfs		/media		tmpfs		mode=1755,nosuid,nodev	0	0
-sysfs		/sys		sysfs		defaults		0	0
-debugfs	/sys/kernel/debug	debugfs		nofail			0	0
-cfgfs		/config		configfs	nofail,noauto		0	0
+tmpfs		/run		  tmpfs		mode=0755,nosuid,nodev	0	0
+tmpfs		/media		  tmpfs		mode=1755,nosuid,nodev	0	0
+debugfs		/sys/kernel/debug debugfs	nofail			0	0
+cfgfs		/config		  configfs	nofail,noauto		0	0
 
 # The chosen backing storage for the overlays placed on /cfg, /etc,
 # /home, /root, and /var, are determined dynamically by /usr/libexec/infix/mnt

doc/ChangeLog.md

@@ -17,10 +17,15 @@ All notable changes to the project are documented in this file.
   can now be enabled per category (bfd, packet, ism, nsm, default-information,
   nssa). All debug options are disabled by default to prevent log flooding in
   production environments. See the documentation for usage examples
+- Add support for configurable container resource limits, memory and CPU.
+  Resource usage is available through the operational datastore, where the
+  currently active resource limits in the container runtime are also available
 - Add support for "routing interfaces", issue #647.  Lists interfaces with IP
   forwarding.  Inspect from CLI using `show interface`, look for `⇅` flag
 - Add operational data journal to statd with hierarchical time-based retention
   policy, keeping snapshots from every 5 minutes (recent) to yearly (historical)
+- Add support data collection script, useful when troubleshooting issues on
+  deployed systems. Gathers system information, logs, and more.  Issue #1287
 
 ### Fixes
 

doc/container.md

@@ -488,6 +488,46 @@ time and analysis of your container application to figure out which
 capabilities you need.
 
 
+Resource Limits
+---------------
+
+Containers can be configured with resource limits to control their memory
+and CPU usage. This helps prevent containers from consuming excessive system
+resources and ensures fair resource allocation across multiple containers.
+
+### Configuring Resource Limits
+
+Resource limits are set per container and include:
+
+ - **Memory:** Maximum memory usage in kibibytes (KiB)
+ - **CPU:** Maximum CPU usage in millicores (1000 millicores = 1 CPU core)
+
+Example configuration limiting a container to 512 MiB of memory and 1.5 CPU cores:
+
+    admin@example:/> configure
+    admin@example:/config/> edit container web
+    admin@example:/config/container/web/> edit resource-limit
+    admin@example:/config/container/web/resource-limit/> set memory 524288
+    admin@example:/config/container/web/resource-limit/> set cpu 1500
+    admin@example:/config/container/web/resource-limit/> leave
+
+Common CPU limit examples:
+
+ - `500` = 0.5 cores (50% of one core)
+ - `1000` = 1.0 cores (one full core)
+ - `2000` = 2.0 cores (two full cores)
+
+### Monitoring Resource Usage
+
+Runtime resource usage statistics are available in the operational datastore:
+
+    admin@example:/> show container web
+    ...
+
+Use `show container usage` to see resource consumption across all containers,
+including memory, CPU, block I/O, network I/O, and process counts.
+
+
 Networking and Containers
 -------------------------
 

package/finit/finit.hash

@@ -1,5 +1,5 @@
 # From https://github.com/troglobit/finit/releases/
-sha256  7ccbcead4e3e6734c81a8c5445f4a27738f19a4ab367d702513a201db9b618c7  finit-4.15-rc1.tar.gz
+sha256  0e4774ccb8933ed92287e6c18d27cb463222dcc1f50a3607e27bbe5fd150ece0  finit-4.15.tar.gz
 
 # Locally calculated
 sha256  868cb6c5414933a48db11186042cfe65c87480d326734bc6cf0e4b19b4a2e52a  LICENSE

package/finit/finit.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FINIT_VERSION = 4.15-rc1
+FINIT_VERSION = 4.15
 FINIT_SITE = https://github.com/troglobit/finit/releases/download/$(FINIT_VERSION)
 FINIT_LICENSE = MIT
 FINIT_LICENSE_FILES = LICENSE

src/klish-plugin-infix/xml/containers.xml

@@ -186,14 +186,11 @@
 </COMMAND>
 
 <COMMAND name="show" help="Show system status and configuration files" mode="switch">
-  <COMMAND name="container" help="Show container status">
-    <ACTION sym="script" in="tty" out="tty" interrupt="true">
-      doas container show |pager
-    </ACTION>
 
-    <SWITCH name="optional" min="0">
+  <COMMAND name="container" help="Show container status">
+    <SWITCH name="subcommands" min="0">
       <COMMAND name="all" help="Show all containers (default only running)">
-        <ACTION sym="script">doas container -a show</ACTION>
+        <ACTION sym="script">show container</ACTION>
       </COMMAND>
       <COMMAND name="log" help="Show container log (jumps to end), alias to 'show log container'">
 	<ACTION sym="script" in="tty" out="tty" interrupt="true">
@@ -231,7 +228,15 @@
 	</ACTION>
       </COMMAND>
     </SWITCH>
+
+    <SWITCH name="optional" min="0" max="1">
+      <PARAM name="name" ptype="/CONTAINERS" help="Container name for detailed view" />
+    </SWITCH>
+    <ACTION sym="script" in="tty" out="tty" interrupt="true">
+      show container $KLISH_PARAM_name |pager
+    </ACTION>
   </COMMAND>
+
 </COMMAND>
 
 </VIEW>

src/klish-plugin-infix/xml/infix.xml

@@ -638,10 +638,18 @@
   <COMMAND name="firewall" help="Show firewall status and configuration">
     <SWITCH name="optional" min="0" max="1">
       <COMMAND name="log" help="Show firewall log (jumps to end), alias to 'show log firewall.log'">
+        <SWITCH name="optional" min="0">
+          <PARAM name="limit" ptype="/UINT" help="Last N lines, default: all"/>
+        </SWITCH>
 	<ACTION sym="script" in="tty" out="tty" interrupt="true">
-	  doas -u $USER cat /log/firewall.log |pager +G
+	  sysrepocfg -X -d operational -x /infix-firewall:firewall -f json -t 60 | /usr/libexec/statd/cli-pretty show-firewall-log $KLISH_PARAM_limit |pager +G
 	</ACTION>
       </COMMAND>
+      <COMMAND name="matrix" help="Show firewall zone matrix">
+        <ACTION sym="script" in="tty" out="tty" interrupt="true">
+          sysrepocfg -X -d operational -x /infix-firewall:firewall -f json -t 60 | /usr/libexec/statd/cli-pretty show-firewall-matrix
+        </ACTION>
+      </COMMAND>
       <COMMAND name="zone" help="Show firewall zones">
         <SWITCH name="optional" min="0">
           <PARAM name="name" ptype="/FIREWALL_ZONES" help="Zone name"/>

src/show/show.py

@@ -173,6 +173,64 @@ def services(args: List[str]) -> None:
 
     cli_pretty(data, f"show-services")
 
+def container(args: List[str]) -> None:
+    """Handle show container [name]
+
+    Arguments:
+        (none) - Show all containers in table format
+        name   - Show detailed view of specific container
+    """
+    data = run_sysrepocfg("/infix-containers:containers")
+    if not data:
+        print("No container data retrieved.")
+        return
+
+    # Fetch interface data for bridge resolution (both table and detailed views)
+    # Fetch operational interface data
+    iface_oper = run_sysrepocfg("/ietf-interfaces:interfaces")
+
+    # Also fetch config data for veth peer information (not in operational)
+    try:
+        result = subprocess.run([
+            "sysrepocfg", "-f", "json", "-X", "-d", "running", "-x", "/ietf-interfaces:interfaces"
+        ], capture_output=True, text=True, check=True)
+        iface_config = json.loads(result.stdout)
+
+        # Merge config veth peer info into operational data
+        if iface_oper and iface_config:
+            oper_ifaces = iface_oper.get('ietf-interfaces:interfaces', {}).get('interface', [])
+            config_ifaces = iface_config.get('ietf-interfaces:interfaces', {}).get('interface', [])
+
+            # Create a map of config interfaces
+            config_map = {iface['name']: iface for iface in config_ifaces}
+
+            # Merge veth peer info from config into operational
+            for oper_iface in oper_ifaces:
+                name = oper_iface.get('name')
+                if name in config_map:
+                    config_iface = config_map[name]
+                    # Add veth peer if it exists in config but not in operational
+                    if 'infix-interfaces:veth' in config_iface and 'infix-interfaces:veth' not in oper_iface:
+                        oper_iface['infix-interfaces:veth'] = config_iface['infix-interfaces:veth']
+
+            data.update(iface_oper)
+    except (subprocess.CalledProcessError, json.JSONDecodeError):
+        # If config fetch fails, just use operational data
+        if iface_oper:
+            data.update(iface_oper)
+
+    if RAW_OUTPUT:
+        print(json.dumps(data, indent=2))
+        return
+
+    if len(args) == 0 or not args[0]:
+        cli_pretty(data, "show-container")
+    elif len(args) == 1:
+        name = args[0]
+        cli_pretty(data, "show-container-detail", name)
+    else:
+        print("Too many arguments provided. Expected: show container [name]")
+
 def bfd(args: List[str]) -> None:
     """Handle show bfd [subcommand] [peer] [brief]
 
@@ -486,6 +544,7 @@ def execute_command(command: str, args: List[str]):
     command_mapping = {
         'bfd': bfd,
         'boot-order': boot_order,
+        'container': container,
         'dhcp': dhcp,
         'hardware': hardware,
         'interface': interface,