English · العربية

NextCore is a performance module for KernelSU, APatch and Magisk with a companion app for control and game monitoring. It reads your SoC on every boot, applies what fits it safely, and switches profiles when a game opens.

⚡ Performance

Sustained mode	Raises the CPU floor (70% of max on big clusters, 50% on the smallest) and lets the governor scale above it. The chip heats slower and stays fast longer.
Game priority	uclamp moves the game to the fast cores and caps background work; vendor values come back in Balanced.
GPU & memory	Performance raises the floor to the middle step and leaves the ceiling open. Full clocks only in Max performance.
Eco	Caps GPU and memory at the middle step instead of pinning the lowest.
Per game	Downscale, FPS target, renderer, refresh rate, do not disturb, bypass charging.

🛡️ Safe on any device

• No read-only locks on kernel nodes, so vendor thermal can always lower clocks.
• Thermal governors and services are left alone, and a kernel panic still reboots.
• The background cleaner only stops your own apps; keyboard, messaging, calls, music and alarms keep running.
• Any tweak whose node is missing in your kernel is skipped.

📱 App

Home	Service status, live gauges, modes, the running game, a 30-minute chart, today's stats.
Engines	CPU, memory and frames pages (live FPS, average, 1% low, stability).
Sessions	Every play session with duration, average FPS and peak temperature, plus per-game totals.
Floating monitor	20 readings to pick and reorder, three layouts, an FPS graph, updates down to 250 ms.

🎮 Floating monitor

FPS is read in real time from the game's own frame times in SurfaceFlinger, with frame time, 1% low and stutters. Also: CPU clock, clusters, load and temperature; GPU load, clock and temperature; RAM; battery temperature, level and power draw; thermal status; network; ping; clock; session time. Long-press the panel in game to switch layout; drag it to move it.

🧩 SoCs

SoC	Support
MediaTek · Snapdragon · Exynos · Tensor · Unisoc	Full: general and chipset tweaks
Others	Partial: general tweaks whose nodes exist in your kernel

📦 Install

1. Remove AZenith if installed and reboot.
2. Download the latest release and flash it in your root manager.
3. Reboot, open the NextCore app and grant root.

If something goes wrong at boot, create /data/local/tmp/nextcore_abort and the service will not start.

Terminal commands

sh /data/adb/modules/nextcore/action.sh get_status     # status
sh /data/adb/modules/nextcore/action.sh set_profile 1  # 1 performance · 2 balanced · 3 eco
sh /data/adb/modules/nextcore/action.sh set_auto 1     # auto mode
sh /data/adb/modules/nextcore/action.sh doctor         # diagnostics

_{Bug reports: open an issue with the output of action.sh doctor · Apache License 2.0, see LICENSE and NOTICE.md}

_{Based on AZenith by Zexshia, under the Apache License 2.0.}