Getting Started

1. Install the dependencies

   • git
   • GNU make
   • avr-gcc + avr-libc
   • dfu-programmer
   • arm-none-eabi-gcc + newlib
   • libusb
   • rust

   using Homebrew

   brew tap osx-cross/avr osx-cross/arm
   brew install rust libusb avr-gcc dfu-programmer arm-gcc-bin

   using APT

   apt-get install build-essential libusb-1.0-0-dev cargo
   apt-get install dfu-programmer avr-libc binutils-avr gcc-avr
   apt-get install libnewlib-arm-none-eabi binutils-arm-none-eabi gcc-arm-none-eabi

2. Clone the repository

   git clone https://github.com/flipper-io/flipper.git
   cd flipper

3. Build and install

   make all install

   By default, the installation prefix is /usr/local. To specify a different prefix, set the PREFIX environment variable to the path of your prefix.

4. Update your device

   make install-atmegau2
   make install-atsam4s
   

   You should see the LED on the device illuminated green. Your device is now raring to go!

5. Install a language binding

   • Python
   • Rust
   • Objective-C/Swift

6. Understand Development Mode

   • Visit this wiki page.