PastaPastaPasta · Oct 29, 2026 · Oct 29, 2026 · Oct 29, 2026 · Oct 29, 2026 · Oct 29, 2026
@@ -4,6 +4,7 @@
 
 | Version | Supported          |
 | ------- | ------------------ |
+| 24.x    | :white_check_mark: |
 | 23.x    | :white_check_mark: |
 | < 23    | :x:                |
 

@@ -21,6 +21,7 @@
     </screenshot>
   </screenshots>
   <releases>
+    <release date="2026-11-05" version="24.0.0"/>
     <release date="2026-10-29" version="23.1.9"/>
     <release date="2026-07-30" version="23.1.8"/>
     <release date="2026-06-30" version="23.1.7"/>

@@ -1,7 +1,7 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH DASH-CLI "1" "October 2026" "dash-cli v23.1.9" "User Commands"
+.TH DASH-CLI "1" "October 2026" "dash-cli v24.0.0" "User Commands"
 .SH NAME
-dash-cli \- manual page for dash-cli v23.1.9
+dash-cli \- manual page for dash-cli v24.0.0
 .SH SYNOPSIS
 .B dash-cli
 [\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Dash Core\/\fR
@@ -15,7 +15,7 @@ dash-cli \- manual page for dash-cli v23.1.9
 .B dash-cli
 [\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
 .SH DESCRIPTION
-Dash Core RPC client version v23.1.9
+Dash Core RPC client version v24.0.0
 .SH OPTIONS
 .HP
 \-?

@@ -1,12 +1,12 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH DASH-QT "1" "October 2026" "dash-qt v23.1.9" "User Commands"
+.TH DASH-QT "1" "October 2026" "dash-qt v24.0.0" "User Commands"
 .SH NAME
-dash-qt \- manual page for dash-qt v23.1.9
+dash-qt \- manual page for dash-qt v24.0.0
 .SH SYNOPSIS
 .B dash-qt
 [\fI\,command-line options\/\fR] [\fI\,URI\/\fR]
 .SH DESCRIPTION
-Dash Core version v23.1.9
+Dash Core version v24.0.0
 .PP
 Optional URI is a Dash address in BIP21 URI format.
 .SH OPTIONS
@@ -20,6 +20,11 @@ Print this help message and exit
 Execute command when an alert is raised (%s in cmd is replaced by
 message)
 .HP
+\fB\-allowignoredconf\fR
+.IP
+For backwards compatibility, treat an unused dash.conf file in the
+datadir as a warning, not an error.
+.HP
 \fB\-assumevalid=\fR<hex>
 .IP
 If this block is in the chain assume that it and its ancestors are valid
@@ -96,9 +101,9 @@ addition, unused mempool memory is shared for this cache (see
 .HP
 \fB\-debuglogfile=\fR<file>
 .IP
-Specify location of debug log file. Relative paths will be prefixed by a
-net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
-default: debug.log)
+Specify location of debug log file (default: debug.log). Relative paths
+will be prefixed by a net\-specific datadir location. Pass
+\fB\-nodebuglogfile\fR to disable writing the log to a file.
 .HP
 \fB\-includeconf=\fR<file>
 .IP
@@ -151,11 +156,12 @@ Reduce storage requirements by enabling pruning (deleting) of old
 blocks. This allows the pruneblockchain RPC to be called to
 delete specific blocks, and enables automatic pruning of old
 blocks if a target size in MiB is provided. This mode is
-incompatible with \fB\-txindex\fR, \fB\-rescan\fR and \fB\-disablegovernance\fR=\fI\,false\/\fR.
-Warning: Reverting this setting requires re\-downloading the
-entire blockchain. (default: 0 = disable pruning blocks, 1 =
-allow manual pruning via RPC, >945 = automatically prune block
-files to stay under the specified target size in MiB)
+incompatible with \fB\-txindex\fR, \fB\-addressindex\fR, \fB\-spentindex\fR and
+\fB\-disablegovernance\fR=\fI\,false\/\fR. Warning: Reverting this setting
+requires re\-downloading the entire blockchain. (default: 0 =
+disable pruning blocks, 1 = allow manual pruning via RPC, >945 =
+automatically prune block files to stay under the specified
+target size in MiB)
 .HP
 \fB\-settings=\fR<file>
 .IP
@@ -215,7 +221,11 @@ Bind to given address and always listen on it (default: 0.0.0.0). Use
 [host]:port notation for IPv6. Append =onion to tag any incoming
 connections to that address and port as incoming Tor connections
 (default: 127.0.0.1:9996=onion, testnet: 127.0.0.1:19996=onion,
-devnet: 127.0.0.1:19796=onion, regtest: 127.0.0.1:19896=onion)
+devnet: 127.0.0.1:19796=onion, regtest: 127.0.0.1:19896=onion).
+The default onion bind is added only when no \fB\-bind\fR is specified.
+When \fB\-listenonion\fR is enabled and \fB\-bind\fR is specified, a
+non\-wildcard =onion bind is required, and wildcard =onion binds
+are rejected.
 .HP
 \fB\-cjdnsreachable\fR
 .IP
@@ -533,6 +543,14 @@ Number of automatic wallet backups (default: 10)
 .IP
 Do not load the wallet and disable wallet RPC calls
 .HP
+\fB\-dustprotectionthreshold=\fR<n>
+.IP
+Automatically lock UTXOs from incoming external transactions at or below
+<n> duffs to protect against dust attacks. Locked UTXOs persist
+across restarts and are not automatically unlocked when threshold
+changes; use lockunspent RPC to unlock manually (0 = disabled,
+default: 0, max: 1000000)
+.HP
 \fB\-instantsendnotify=\fR<cmd>
 .IP
 Execute command when a wallet InstantSend transaction is successfully
@@ -553,11 +571,6 @@ been used.
 Spend up to this amount in additional (absolute) fees (in DASH) if it
 allows the use of partial spend avoidance (default: 0.00)
 .HP
-\fB\-rescan=\fR<mode>
-.IP
-Rescan the block chain for missing wallet transactions on startup (1 =
-start from wallet creation time, 2 = start from genesis block)
-.HP
 \fB\-signer=\fR<cmd>
 .IP
 External signing tool, see doc/external\-signer.md
@@ -632,6 +645,14 @@ confirmation on average within n blocks (default: 6)
 .PP
 HD wallet options:
 .HP
+\fB\-allow\-deprecated\-long\-mnemonics\fR
+.IP
+Allow creating an HD wallet with a mnemonic passphrase of 249 to 256
+bytes. Seed derivation ignores the bytes past the 248th, so use
+this only to recover a wallet created with such a passphrase by
+Dash Core 19.2.0 or later. It can't recover one created by an
+earlier version (default: 0)
+.HP
 \fB\-hdseed=\fR<hex>
 .IP
 User defined seed for HD wallet (should be in hex). Only has effect
@@ -883,9 +904,9 @@ bench, blockstorage, chainlocks, cmpctblock, coindb, coinjoin,
 creditpool, ehf, estimatefee, gobject, http, i2p, instantsend,
 ipc, leveldb, libevent, llmq, llmq\-dkg, llmq\-sigs, mempool,
 mempoolrej, mnpayments, mnsync, net, netconn, proxy, prune, qt,
-rand, reindex, rpc, selectcoins, spork, tor, txreconciliation,
-validation, walletdb, zmq. This option can be specified multiple
-times to output multiple categories.
+rand, reindex, rpc, scan, selectcoins, spork, tor,
+txreconciliation, validation, walletdb, zmq. This option can be
+specified multiple times to output multiple categories.
 .HP
 \fB\-debugexclude=\fR<category>
 .IP
@@ -924,12 +945,6 @@ Prepend debug output with timestamp (default: 1)
 Maximum total fees (in DASH) to use in a single wallet transaction;
 setting this too low may abort large transactions (default: 0.10)
 .HP
-\fB\-minsporkkeys=\fR<n>
-.IP
-Overrides minimum spork signers to change spork value. Only useful for
-regtest and devnet. Using this on mainnet or testnet will ban
-you.
-.HP
 \fB\-printtoconsole\fR
 .IP
 Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
@@ -1030,8 +1045,8 @@ Relay and mine data carrier transactions (default: 1)
 .HP
 \fB\-datacarriersize\fR
 .IP
-Maximum size of data in data carrier transactions we relay and mine
-(default: 83)
+Relay and mine transactions whose data\-carrying raw scriptPubKey is of
+this size or less (default: 83)
 .HP
 \fB\-minrelaytxfee=\fR<amt>
 .IP
@@ -1172,7 +1187,7 @@ Set the font weight for bold texts. Possible range 0 to 8 (default: 4)
 .HP
 \fB\-font\-weight\-normal\fR
 .IP
-Set the font weight for normal texts. Possible range 0 to 8 (default: 1)
+Set the font weight for normal texts. Possible range 0 to 8 (default: 2)
 .HP
 \fB\-lang=\fR<lang>
 .IP

@@ -1,15 +1,15 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH DASH-TX "1" "October 2026" "dash-tx v23.1.9" "User Commands"
+.TH DASH-TX "1" "October 2026" "dash-tx v24.0.0" "User Commands"
 .SH NAME
-dash-tx \- manual page for dash-tx v23.1.9
+dash-tx \- manual page for dash-tx v24.0.0
 .SH SYNOPSIS
 .B dash-tx
 [\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded dash transaction\/\fR
 .br
 .B dash-tx
 [\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded dash transaction\/\fR
 .SH DESCRIPTION
-Dash Core dash\-tx utility version v23.1.9
+Dash Core dash\-tx utility version v24.0.0
 .SH OPTIONS
 .HP
 \-?

@@ -1,12 +1,12 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH DASH-UTIL "1" "October 2026" "dash-util v23.1.9" "User Commands"
+.TH DASH-UTIL "1" "October 2026" "dash-util v24.0.0" "User Commands"
 .SH NAME
-dash-util \- manual page for dash-util v23.1.9
+dash-util \- manual page for dash-util v24.0.0
 .SH SYNOPSIS
 .B dash-util
 [\fI\,options\/\fR] [\fI\,commands\/\fR]  \fI\,Do stuff\/\fR
 .SH DESCRIPTION
-Dash Core dash\-util utility version v23.1.9
+Dash Core dash\-util utility version v24.0.0
 .SH OPTIONS
 .HP
 \-?

@@ -1,9 +1,9 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH DASH-WALLET "1" "October 2026" "dash-wallet v23.1.9" "User Commands"
+.TH DASH-WALLET "1" "October 2026" "dash-wallet v24.0.0" "User Commands"
 .SH NAME
-dash-wallet \- manual page for dash-wallet v23.1.9
+dash-wallet \- manual page for dash-wallet v24.0.0
 .SH DESCRIPTION
-Dash Core dash\-wallet version v23.1.9
+Dash Core dash\-wallet version v24.0.0
 .PP
 dash\-wallet is an offline tool for creating and interacting with Dash Core wallet files.
 By default dash\-wallet will act on wallets in the default mainnet wallet directory in the datadir.
@@ -35,6 +35,10 @@ with 'createfromdump', loads the records into a new wallet.
 The format of the wallet file to create. Either "bdb" or "sqlite". Only
 used with 'createfromdump'
 .HP
+\fB\-legacy\fR
+.IP
+Create legacy wallet. Only for 'create'
+.HP
 \fB\-usehd\fR
 .IP
 Create HD (hierarchical deterministic) wallet (default: 1)