This repository was archived by the owner on Jan 19, 2024. It is now read-only.
Repository navigation
Setup
After you have created your device, next thing you need to do is connect it to your local network.
Download the iOS app from the AppStore.
Application home page
- Enter your e-mail (make sure it is available and not already in use)
- Enter your password
- If you have already created an account, go to 'Log into existing account' and enter your Email and Password.
- After creating an account, you will need to log in;
- To connect your device, press and hold the gold button located on the bottom part of the main board for five seconds until a blue and red light starts blinking.
Once the blue light is on , that means your device is connected to your WiFi network.
If the light starts blinking and switching between red and blue, it means your device is in configuration mode. If the red light is on, this means your device is not connected to WiFi.
You can choose to change WiFi settings on the device, or entirely delete the device data and start over on this screen.
If you followed all the instructions, your device should start reading and sending data to your smartphone.