A Rust + egui, native Wayland configurator for the 8BitDo Ultimate 2 Wireless.
| Live motion | Lighting |
|---|---|
![]() |
![]() |
| Rumble | Macros |
|---|---|
![]() |
![]() |
- Live USB/wireless inputs, all reported buttons, deadzone circles and collapsible settings.
- Profiles, remapping, stick/trigger ranges, section resets, RGB colours and Off.
- Gyro controller model, automatic still calibration, rumble and LT/RT response previews.
- Macro steps, full backups, pairing guidance, separate controller/dongle firmware tools.
- Both firmware versions on screen; same-version updates are blocked.
Requires Wayland, Rust 1.95+, a C compiler, pkg-config and Wayland/EGL/xkbcommon development libraries.
cargo build --release --locked --manifest-path native/Cargo.toml
sh native/install.sh
ultimate2-nativeConnect USB to edit settings. Wireless modes: power off, then hold B + Home for DInput/gyro, X + Home for XInput, or Y + Home for Switch. The app shows these instructions and detects the actual mode; a working software mode-switch command has not been found. Polling is up to 1000 Hz over USB/2.4G; adjustment is unavailable.
If access is denied, install the udev rule and reconnect. Settings save explicitly; backups go to ~/.local/share/ultimate2-native/backups/. Protocol and test notes.
Experimental: firmware downloads and both bootloader entry/reset paths were checked. Actual firmware flashing and macro writes have not yet been hardware-tested.
Based on Miguel Sanz’s original configurator, including its controller artwork, callouts and section icons. Sensor behaviour follows SDL’s 8BitDo driver. Original MIT credits are preserved; the legacy Python/web sources remain available.
Developed with AI assistance. This unofficial fork is not affiliated with 8BitDo. No proprietary application code or assets are redistributed.




