morning_timer.sh — schedule the morning routine overnight on the dev box

README.md

@@ -17,7 +17,9 @@ for the organism's morning and general starting point: what ran overnight, the
 Heart's readiness headline, who in the community is waiting on a reply, what
 to resume, and the upkeep doors — each actionable row with a one-tap 📋
 copy-for-Claude command. Regenerated each morning; the local sync/clean leg is
-one terminal command, `bash bin/morning.sh`.
+one terminal command, `bash bin/morning.sh` — or schedule it overnight on the
+dev box with `bash bin/morning_timer.sh install`, so the board is already
+fresh when you wake.
 
 ## How PyAutoBrain works
 

bin/morning.sh

@@ -16,6 +16,9 @@
 #   bash PyAutoBrain/bin/morning.sh --no-publish  # skip the dev-box publish
 #   DRY_RUN=1 bash PyAutoBrain/bin/morning.sh  # preview clean-slate only
 #
+# To run overnight automatically (so the board is fresh on waking), schedule
+# it on this machine once: bash PyAutoBrain/bin/morning_timer.sh install
+#
 # Both steps are the recoverable, git-aware ones /wake_up auto-ran (its
 # guardrail): sync skips any repo with real uncommitted work; clean-slate
 # deletes only untracked REGENERABLE artifacts and reports orphans instead of

bin/morning_timer.sh

@@ -0,0 +1,149 @@
+#!/usr/bin/env bash
+#
+# morning_timer.sh — schedule bin/morning.sh to run overnight on THIS machine,
+# so the sync/clean/publish leg is already done when the human wakes up and
+# the board reads "observed this morning" from the first glance.
+#
+# Every leg of morning.sh is local (it syncs and cleans YOUR checkouts and
+# publishes YOUR dev-box observation), so the schedule must live on the dev
+# box — the board's own cloud refresh (brain_board.yml, 05:30 UTC) is separate
+# and unaffected. The publish push re-triggers a board render anyway, so the
+# board updates minutes after the local run regardless of ordering.
+#
+#   bash PyAutoBrain/bin/morning_timer.sh install [HH:MM]   # default 05:30 local
+#   bash PyAutoBrain/bin/morning_timer.sh uninstall
+#   bash PyAutoBrain/bin/morning_timer.sh status
+#   bash PyAutoBrain/bin/morning_timer.sh print [HH:MM]     # show what install
+#                                                           #   would write
+#
+# Backend: systemd user units (pyauto-morning.service/.timer, Persistent=true
+# so a night the machine slept through is caught up at next wake/boot) when
+# `systemctl --user` works; otherwise a marked crontab line. Override with
+# MORNING_TIMER_MODE=systemd|cron.
+#
+# Prerequisites on the dev box: non-interactive git credentials (the publish
+# leg pushes to the Brain's main), and for the systemd path a user session at
+# the fire time — enable lingering once (`loginctl enable-linger $USER`) so
+# the timer fires before first login; install says so if it is off.
+#
+# Caveat: clean_slate deletes untracked REGENERABLE datasets. If something
+# else runs on this machine overnight and writes datasets it still needs,
+# schedule after it finishes, or point the timer at
+# `morning.sh --no-publish`-style variants by editing the unit.
+
+set -u
+
+HERE="$(cd "$(dirname "$(readlink -f "${BASH_SOURCE[0]}")")" && pwd)"
+MORNING="$HERE/morning.sh"
+UNIT_DIR="${XDG_CONFIG_HOME:-$HOME/.config}/systemd/user"
+LOG_DIR="${XDG_CACHE_HOME:-$HOME/.cache}/pyauto"
+MARKER="# pyauto-morning (installed by morning_timer.sh)"
+
+when="${2:-05:30}"
+case "$when" in
+  [0-2][0-9]:[0-5][0-9]) ;;
+  *) echo "morning_timer: time must be HH:MM (got '$when')" >&2; exit 2 ;;
+esac
+hh="${when%%:*}"; mm="${when##*:}"
+if [ "$((10#$hh))" -gt 23 ]; then
+  echo "morning_timer: hour must be 00-23 (got '$hh')" >&2; exit 2
+fi
+
+mode="${MORNING_TIMER_MODE:-}"
+if [ -z "$mode" ]; then
+  if command -v systemctl >/dev/null 2>&1 && systemctl --user show-environment >/dev/null 2>&1; then
+    mode=systemd
+  elif command -v crontab >/dev/null 2>&1; then
+    mode=cron
+  else
+    echo "morning_timer: neither a systemd user session nor crontab is available" >&2
+    exit 1
+  fi
+fi
+
+service_unit() {
+  cat <<EOF
+[Unit]
+Description=PyAuto morning routine (sync + clean + dev-box publish)
+
+[Service]
+Type=oneshot
+ExecStart=/bin/bash $MORNING
+EOF
+}
+
+timer_unit() {
+  cat <<EOF
+[Unit]
+Description=Run the PyAuto morning routine overnight
+
+[Timer]
+OnCalendar=*-*-* $hh:$mm:00
+Persistent=true
+
+[Install]
+WantedBy=timers.target
+EOF
+}
+
+cron_line() {
+  # Strip a leading zero so cron never sees an octal-looking field.
+  printf '%d %d * * * /bin/bash %s >> %s/morning.log 2>&1 %s\n' \
+    "$((10#$mm))" "$((10#$hh))" "$MORNING" "$LOG_DIR" "$MARKER"
+}
+
+case "${1:-status}" in
+  print)
+    if [ "$mode" = systemd ]; then
+      echo "# $UNIT_DIR/pyauto-morning.service"; service_unit
+      echo; echo "# $UNIT_DIR/pyauto-morning.timer"; timer_unit
+    else
+      echo "# crontab line"; cron_line
+    fi
+    ;;
+  install)
+    if [ "$mode" = systemd ]; then
+      mkdir -p "$UNIT_DIR"
+      service_unit > "$UNIT_DIR/pyauto-morning.service"
+      timer_unit   > "$UNIT_DIR/pyauto-morning.timer"
+      systemctl --user daemon-reload
+      systemctl --user enable --now pyauto-morning.timer
+      echo "installed: pyauto-morning.timer fires daily at $when local (Persistent=true"
+      echo "catches up a night the machine slept through). Logs: journalctl --user -u pyauto-morning"
+      if command -v loginctl >/dev/null 2>&1 \
+         && [ "$(loginctl show-user "$USER" -p Linger --value 2>/dev/null)" != "yes" ]; then
+        echo "note: lingering is OFF — before first login the timer cannot fire."
+        echo "      enable once with: loginctl enable-linger $USER"
+      fi
+    else
+      mkdir -p "$LOG_DIR"
+      { crontab -l 2>/dev/null | grep -vF "$MARKER"; cron_line; } | crontab -
+      echo "installed: crontab entry fires daily at $when local. Log: $LOG_DIR/morning.log"
+      echo "note: plain cron does not catch up runs the machine slept through."
+    fi
+    ;;
+  uninstall)
+    if [ "$mode" = systemd ]; then
+      systemctl --user disable --now pyauto-morning.timer 2>/dev/null
+      rm -f "$UNIT_DIR/pyauto-morning.service" "$UNIT_DIR/pyauto-morning.timer"
+      systemctl --user daemon-reload
+      echo "uninstalled pyauto-morning.timer"
+    else
+      crontab -l 2>/dev/null | grep -vF "$MARKER" | crontab -
+      echo "removed the pyauto-morning crontab entry"
+    fi
+    ;;
+  status)
+    if [ "$mode" = systemd ]; then
+      systemctl --user list-timers pyauto-morning.timer --no-pager 2>/dev/null \
+        || echo "pyauto-morning.timer is not installed"
+    else
+      crontab -l 2>/dev/null | grep -F "$MARKER" \
+        || echo "no pyauto-morning crontab entry"
+    fi
+    ;;
+  *)
+    echo "usage: morning_timer.sh install [HH:MM] | uninstall | status | print [HH:MM]" >&2
+    exit 2
+    ;;
+esac

tests/test_morning_timer.py

@@ -0,0 +1,45 @@
+"""Contract tests for bin/morning_timer.sh — the overnight scheduler for the
+morning routine. Hermetic: only the `print` mode runs (it renders exactly what
+`install` would write, without touching systemd or crontab), forced onto each
+backend via MORNING_TIMER_MODE."""
+
+import os
+import subprocess
+from pathlib import Path
+
+BRAIN_HOME = Path(__file__).resolve().parents[1]
+SCRIPT = BRAIN_HOME / "bin" / "morning_timer.sh"
+MORNING = BRAIN_HOME / "bin" / "morning.sh"
+
+
+def _run(mode, *args):
+    return subprocess.run(
+        ["bash", str(SCRIPT), *args],
+        capture_output=True, text=True,
+        env={**os.environ, "MORNING_TIMER_MODE": mode},
+    )
+
+
+def test_systemd_print_renders_persistent_timer_at_the_given_time():
+    r = _run("systemd", "print", "04:45")
+    assert r.returncode == 0, r.stderr
+    assert f"ExecStart=/bin/bash {MORNING}" in r.stdout
+    assert "OnCalendar=*-*-* 04:45:00" in r.stdout
+    # A night the machine slept through is caught up, not skipped.
+    assert "Persistent=true" in r.stdout
+
+
+def test_cron_print_renders_marked_line_without_octal_fields():
+    r = _run("cron", "print", "05:05")
+    assert r.returncode == 0, r.stderr
+    # Leading zeros stripped (05 would read as octal-ish cron noise) and the
+    # marker present so uninstall can find its own line.
+    assert f"5 5 * * * /bin/bash {MORNING}" in r.stdout
+    assert "# pyauto-morning" in r.stdout
+
+
+def test_bad_times_are_rejected():
+    assert _run("cron", "print", "4x:45").returncode == 2
+    assert _run("cron", "print", "25:00").returncode == 2
+    # Default time is valid.
+    assert _run("cron", "print").returncode == 0