build/R0054_NVME.cap is the Intel R0054 update capsule with the standard
NvmExpressDxe_4 UEFI DXE driver added to the main DXE firmware volume.
No stock module was removed, resized, or relocated.
The input is the unmodified Intel capsule at
orig/S3420GP__BIOS54_EFI_BIOS_ONLY/R0054.cap. The module is stored at
src/modules/NvmExpressDxe_4.ffs. Rebuild the output with:
python src/add_nvme_dxe.py `
orig/S3420GP__BIOS54_EFI_BIOS_ONLY/R0054.cap `
src/modules/NvmExpressDxe_4.ffs `
build/R0054_NVME.capThis is an unofficial firmware image and has not been tested on physical
hardware. A failed or incompatible flash can leave the board unbootable.
Keep the original R0054Rec.cap, recovery jumper instructions, and a tested
recovery USB available. An external SPI programmer plus a verified chip dump
is the safest fallback.
Use only on an Intel S3420GPLX, S3420GPLC, S3420GPRX, or S3420GPV board that is already compatible with the stock R0054 package. Follow Intel's original IFlash32 instructions. If IFlash32 rejects the modified capsule, do not bypass its checks without first obtaining and preserving a full SPI dump.
NVMe booting still requires UEFI/GPT installation media. The new device may appear as a generic UEFI boot entry rather than by the SSD model name.
Slot 5 is a PCIe Gen2 x8 electrical slot, but its lane partition cannot be
changed by this BIOS capsule. On the Xeon 3400 generation, the processor
samples CFG[2:0] hardware straps at reset: 110b selects x8/x8 (the board's
Slot 5/Slot 6 topology), while 101b selects four x4 root ports. The only
documented firmware-visible value is the read-only IIOMISCSS status register
(bus 0, device 8, function 0, offset 0x9c). There is no writable
bifurcation-control register like those provided by later Xeon generations.
The R0054 Setup HII data was also checked. It has no active bifurcation question; generic x4/x4 strings embedded for other Intel reference platforms are unreferenced. Adding a menu item would therefore have no hardware effect.
Consequently, build/R0054_NVME.cap remains in the safe stock x8/x8 mode. A
passive dual-NVMe adapter cannot expose its second drive in Slot 5. Use an
adapter with an onboard PCIe switch if two or more NVMe devices are required in
that slot. Changing the CPU strap network would be a board-level hardware
modification, affects the complete 16-lane interface (both Slots 5 and 6), and
is outside the scope of this firmware image.