firmware/userPrefs.jsonc at develop · jessm33/firmware · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
{
  // "USERPREFS_BUTTON_PIN": "36",
  // "USERPREFS_CHANNELS_TO_WRITE": "3",
  // "USERPREFS_CHANNEL_0_DOWNLINK_ENABLED": "false",
  // "USERPREFS_CHANNEL_0_NAME": "REPLACEME",
  // "USERPREFS_CHANNEL_0_PRECISION": "14",
  // "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
  // "USERPREFS_CHANNEL_0_UPLINK_ENABLED": "true",
  // "USERPREFS_CHANNEL_1_DOWNLINK_ENABLED": "false",
  // "USERPREFS_CHANNEL_1_NAME": "NodeChat",
  // "USERPREFS_CHANNEL_1_PRECISION": "14",
  // "USERPREFS_CHANNEL_1_PSK": "{ 0x4e, 0x22, 0x1d, 0x8b, 0xc3, 0x09, 0x1b, 0xe2, 0x11, 0x9c, 0x89, 0x12, 0xf2, 0x25, 0x19, 0x5d, 0x15, 0x3e, 0x30, 0x7b, 0x86, 0xb6, 0xec, 0xc4, 0x6a, 0xc3, 0x96, 0x5e, 0x9e, 0x10, 0x9d, 0xd5 }",
  // "USERPREFS_CHANNEL_1_UPLINK_ENABLED": "false",
  // "USERPREFS_CHANNEL_2_DOWNLINK_ENABLED": "false",
  // "USERPREFS_CHANNEL_2_NAME": "YardSale",
  // "USERPREFS_CHANNEL_2_PRECISION": "14",
  // "USERPREFS_CHANNEL_2_PSK": "{ 0x15, 0x6f, 0xfe, 0x46, 0xd4, 0x56, 0x63, 0x8a, 0x54, 0x43, 0x13, 0xf2, 0xef, 0x6c, 0x63, 0x89, 0xf0, 0x06, 0x30, 0x52, 0xce, 0x36, 0x5e, 0xb1, 0xe8, 0xbb, 0x86, 0xe6, 0x26, 0x5b, 0x1d, 0x58 }",
  // "USERPREFS_CHANNEL_2_UPLINK_ENABLED": "false",
  // "USERPREFS_CONFIG_GPS_MODE": "meshtastic_Config_PositionConfig_GpsMode_ENABLED",
  // "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
  // "USERPREFS_LORA_TX_DISABLED": "1", // If set, forces config.lora.tx_enabled=false during lora bootstrap
  // "USERPREFS_CONFIG_LORA_REGION": "meshtastic_Config_LoRaConfig_RegionCode_US",
  // "USERPREFS_CONFIG_OWNER_LONG_NAME": "My Long Name",
  // "USERPREFS_CONFIG_OWNER_SHORT_NAME": "MLN",
  // "USERPREFS_CONFIG_DEVICE_ROLE": "meshtastic_Config_DeviceConfig_Role_CLIENT", // Defaults to CLIENT. ROUTER*, and LOST AND FOUND roles are restricted.
  // "USERPREFS_EVENT_MODE": "1",
  // "USERPREFS_EVENT_MODE_HOP_LIMIT": "3", // Event-mode default and firmware-generated/relay hop cap (0-7; default 3)
  // "USERPREFS_TMM_APPLY_TO_PRIVATE_CHANNELS": "1", // Extend TMM position dedup and precision clamping to private/custom-key channels (default: well-known channels only)
  // "USERPREFS_FIRMWARE_EDITION": "meshtastic_FirmwareEdition_BURNING_MAN",
  // "USERPREFS_FIXED_BLUETOOTH": "121212",
  // "USERPREFS_FIXED_GPS": "",
  // "USERPREFS_FIXED_GPS_ALT": "0",
  // "USERPREFS_FIXED_GPS_LAT": "48.85873920",
  // "USERPREFS_FIXED_GPS_LON": "2.294508368",
  // "USERPREFS_CONFIG_SMART_POSITION_ENABLED": "false",
  // "USERPREFS_CONFIG_GPS_UPDATE_INTERVAL": "600",
  // "USERPREFS_CONFIG_POSITION_BROADCAST_INTERVAL": "1800",
  // "USERPREFS_CONFIG_DEVICE_TELEM_UPDATE_INTERVAL": "900", // Device telemetry update interval in seconds
  // "USERPREFS_CONFIG_ENV_TELEM_UPDATE_INTERVAL": "900",     // Environment telemetry update interval in seconds
  // "USERPREFS_CONFIG_ENVIRONMENT_MEASUREMENT_ENABLED": "1", // Force BMP280/sensor reads + LoRa broadcast on first boot
  // "USERPREFS_CONFIG_ENV_SCREEN_SCREEN_ENABLED": "1",      // Environment telemetry enable on screen
  // "USERPREFS_CONFIG_AQ_TELEM_UPDATE_INTERVAL": "900",     // AQ telemetry update interval in seconds
  // "USERPREFS_CONFIG_AQ_MEASUREMENT_ENABLED": "1",         // AQ telemetry enable
  // "USERPREFS_CONFIG_AQ_SCREEN_ENABLED": "1",              // AQ telemetry enable on screen
  // "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
  // "USERPREFS_LORACONFIG_TX_POWER": "0",
  // "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST",
  // "USERPREFS_CONFIG_SECURITY_PACKET_SIGNATURE_POLICY": "meshtastic_Config_SecurityConfig_PacketSignaturePolicy_PACKET_SIGNATURE_POLICY_BALANCED", // Authenticity policy applied to remotely received packets.
  // "USERPREFS_USE_ADMIN_KEY_0": "{ 0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24, 0xdf, 0x13, 0xca, 0x5a, 0xa6, 0x0c, 0x0d, 0xec, 0x85, 0x5a, 0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a, 0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c }",
  // "USERPREFS_USE_ADMIN_KEY_1": "{}",
  // "USERPREFS_USE_ADMIN_KEY_2": "{}",
  // "USERPREFS_OEM_TEXT": "Caterham Car Club",
  // "USERPREFS_OEM_FONT_SIZE": "0",
  // "USERPREFS_OEM_IMAGE_WIDTH": "50",
  // "USERPREFS_OEM_IMAGE_HEIGHT": "28",
  // "USERPREFS_OEM_IMAGE_DATA": "{ 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x03, 0x00, 0x00, 0x00, 0xC0, 0x07, 0x80, 0x0F, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x61, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x67, 0x00, 0x00, 0x00, 0x18, 0x1F, 0xF0, 0x67, 0x00, 0x00, 0x00, 0x30, 0x1F, 0xF8, 0x33, 0x00, 0x00, 0x00, 0x30, 0x00, 0xFC, 0x31, 0x00, 0x00, 0x00, 0x60, 0x00, 0xFE, 0x18, 0x00, 0x00, 0x00, 0x60, 0x00, 0x7E, 0x18, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x3F, 0x0C, 0x00, 0x00, 0x00, 0xC0, 0x80, 0x1F, 0x0C, 0x00, 0x00, 0x00, 0x80, 0x81, 0x1F, 0x06, 0x00, 0x00, 0x00, 0x80, 0xC1, 0x0F, 0x06, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xE6, 0x8F, 0x01, 0x00, 0x00, 0x00, 0x00, 0xEE, 0xC7, 0x01, 0x00, 0x00, 0x00, 0x00, 0x0C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00}",
  // "USERPREFS_NETWORK_ENABLED_PROTOCOLS": "1", // Enable UDP mesh
  // "USERPREFS_NETWORK_WIFI_ENABLED": "true",
  // "USERPREFS_NETWORK_WIFI_SSID": "wifi_ssid",
  // "USERPREFS_NETWORK_WIFI_PSK": "wifi_psk",
  // "USERPREFS_MQTT_ENABLED": "1",
  // "USERPREFS_MQTT_ADDRESS": "'mqtt.meshtastic.org'",
  // "USERPREFS_MQTT_USERNAME": "meshdev",
  // "USERPREFS_MQTT_PASSWORD": "large4cats",
  // "USERPREFS_MQTT_ENCRYPTION_ENABLED": "true",
  // "USERPREFS_MQTT_TLS_ENABLED": "false",
  // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
  // "USERPREFS_MESH_BEACON_LISTEN_ENABLED": "true", // Accept incoming beacons (default: on)
  //   "USERPREFS_MESH_BEACON_BROADCAST_ENABLED": "true",           // Periodically broadcast beacons from this node
  //   "USERPREFS_MESH_BEACON_MESSAGE": "Join us on NarrowSlow!!!", // Text payload included in every beacon broadcast
  //   "USERPREFS_MESH_BEACON_INTERVAL_SECS": "3600",               // Broadcast interval in seconds (min 3600 = 1 hour)
  //   "USERPREFS_MESH_BEACON_OFFER_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_NARROW_SLOW", // Modem preset advertised in the beacon payload (listeners can adopt this)
  //   "USERPREFS_MESH_BEACON_OFFER_REGION": "meshtastic_Config_LoRaConfig_RegionCode_EU_N_868",     // Region advertised in the beacon payload
  // "USERPREFS_MESH_BEACON_OFFER_CHANNEL_NAME": "'MyChannel'",   // Channel name advertised in the beacon payload
  // "USERPREFS_MESH_BEACON_OFFER_CHANNEL_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }", // PSK for the offered channel (32-byte AES-256)
  //   "USERPREFS_MESH_BEACON_ON_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST",      // Modem preset to use when transmitting beacons (radio temporarily switched for TX)
  //   "USERPREFS_MESH_BEACON_ON_REGION": "meshtastic_Config_LoRaConfig_RegionCode_EU_868",          // Region to use when transmitting beacons
  //   "USERPREFS_MESH_BEACON_ON_CHANNEL_NAME": "'LongFast'",      // Channel name to use on the TX radio config - uses default if unset.
  // "USERPREFS_MESH_BEACON_ON_CHANNEL_PSK": "{ 0x01 }",         // PSK for the TX channel (0x01 = Meshtastic default PSK)
  // "USERPREFS_MESH_BEACON_ON_CHANNEL_NUM": "0",               // LoRa channel/frequency slot to use on the TX radio config - zero is default, 20 is standard for US LongFast, etc.
  //   "USERPREFS_MESH_BEACON_LEGACY_SPLIT": "true",               // When both text and offer are present, split into a separate MESH_BEACON_APP (offer) and TEXT_MESSAGE_APP (text) for legacy client compatibility
  // Multi-target broadcast: when any TARGET_<N>_* key is set, broadcast_targets overrides the
  // single-target broadcast_on_* fields above. Each target transmits its own copy of the beacon.
  // Up to 4 targets (0-3). Only TARGET_0 is used here; uncomment TARGET_1 to add a second preset.
  // CHANNEL_INDEX references a slot in the device's channel table (0..MAX_NUM_CHANNELS-1); that
  // channel must already be configured on the node (its key is needed to encrypt the beacon).
  // "USERPREFS_MESH_BEACON_TARGET_0_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST",
  // "USERPREFS_MESH_BEACON_TARGET_0_REGION": "meshtastic_Config_LoRaConfig_RegionCode_EU_868",
  // "USERPREFS_MESH_BEACON_TARGET_0_CHANNEL_INDEX": "0",   // device channel-table slot to transmit on
  // "USERPREFS_MESH_BEACON_TARGET_1_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_NARROW_SLOW",
  // "USERPREFS_MESH_BEACON_TARGET_1_REGION": "meshtastic_Config_LoRaConfig_RegionCode_EU_N_868",
  // "USERPREFS_MESH_BEACON_TARGET_1_CHANNEL_INDEX": "1",
  // "USERPREFS_MESH_BEACON_TARGET_2_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST",
  // "USERPREFS_MESH_BEACON_TARGET_2_REGION": "meshtastic_Config_LoRaConfig_RegionCode_EU_868",
  // "USERPREFS_MESH_BEACON_TARGET_2_CHANNEL_INDEX": "2",
  // "USERPREFS_MESH_BEACON_TARGET_3_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST",
  // "USERPREFS_MESH_BEACON_TARGET_3_REGION": "meshtastic_Config_LoRaConfig_RegionCode_EU_868",
  // "USERPREFS_MESH_BEACON_TARGET_3_CHANNEL_INDEX": "3",
  // "USERPREFS_RINGTONE_NAG_SECS": "60",
  // "USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS": "43200",
  // "USERPREFS_UI_TEST_LOG": "true", // Test-only: emits `Screen: frame N/M name=... reason=...` log per UI transition (for the meshtastic-mcp ui test tier); off in release builds.
  "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
  // "USERPREFS_NETWORK_IPV6_ENABLED": "1",
  "USERPREFS_TZ_STRING": "tzplaceholder                                         "
}