diff --git a/IMPLEMENTATION.md b/IMPLEMENTATION.md index 8fa5fbae..607064cf 100644 --- a/IMPLEMENTATION.md +++ b/IMPLEMENTATION.md @@ -57,7 +57,7 @@ drift : 1.1 us over the run (0.06 us per second) 実機の MIDI ケーブルでは、ベンドやエクスプレッションを細かく書いた曲ほどシークが速くなる。 **追いつきは、設定に関係なく MIDI ケーブルの速さ(3125 バイト/秒)以下で送る。** 追いつきは目標までを一度に渡すので、ケーブルより速いと間にあるバッファが溢れる。Linux の ALSA は、ハードウェアの出力バッファが溢れると送り手に知らせずに捨て、受け側アプリのキューが溢れるとキューごと捨てる。 -環境設定の転送レート上限は、SysEx だけでなくすべてのメッセージに、ポートごとに効く(ポートはそれぞれ別のケーブル)。シークの始めの音切り、停止時のオールサウンドオフ、追いつきで溜めた値もこれに従う。 +転送レート上限はポートマップごとに持ち、曲を流すマップのものが効く(`PortMap.TransferRate`)。取りこぼす古い音源と、上限の要らないオーディオプラグインやソフトウェア音源とは、別のマップでつなぐため。上限は SysEx だけでなくすべてのメッセージに、ポートごとに効く(ポートはそれぞれ別のケーブル)。シークの始めの音切り、停止時のオールサウンドオフ、追いつきで溜めた値もこれに従う。 同じ時刻のイベントは順番どおりに送るので、先のイベントが上限で待てば、別のポートの後のイベントも待つ。 **シークの始めには、設定に関係なくオールサウンドオフとオールノートオフを送る。** リセットオールコントローラは送らない。前へのシークは、それまでに曲が設定したものを送り直さないため。一時停止も同じ理由で、送るのはオールサウンドオフとオールノートオフだけにする(設定で止めていなければ)。 @@ -66,6 +66,8 @@ F7 で分けた SysEx の前半と後半の間に来たシークは、SysEx が WinMM は SysEx をドライバが後から送るので、送り終わるまで待ってから音切りを送る(`IEventSink.WaitUntilSent`)。 停止時も、開いたままの SysEx は F7 で閉じてからオールサウンドオフなどを送る。打ち切った SysEx の後半は、先頭のデータバイトを落として送る。 +**止めるときは、押さえている鍵盤を先に離す。** 停止・一時停止・シークでオールサウンドオフなどを送る前に、まだ押さえている鍵盤にノートオフを送る(`Sequencer.ReleaseKeys`)。押さえている数は、送ったノートオンとノートオフからポート・チャンネル・鍵盤ごとに数える。SOUND Canvas VA は、モノモードのパートで鳴っているノートをオールサウンドオフとオールノートオフで止めると、そのパートがおかしくなり、後に来るノートが別の音で鳴る。GS リセットでも直らず、次の曲に残る。ノートオフで離してから止めると起きない。 + ひとつだけ即応でない場面がある。チャンネルメッセージが延々と続く区間は内側のループが一気に送り切るまで依頼を見ない。ミリ秒の単位で、途中で止めるとその区間だけ中途半端に送った状態になるので、あえて区切っていない。 ## 曲送りとプレイリスト @@ -386,6 +388,24 @@ SC-55 で作られた曲には、存在しない音色を指定していても - 何を送ったかではなく機械が何を持っているかを追うので、**曲をまたいでも状態を持ち越す**。 切り替えは出力音源と同じく次の曲から効く。 +## パートの分割 + +**17 パート以上の音源に宛てた曲を、各ポートの 16 パートの音源へ割り振る**(ポートマップ設定の「パートを16ずつ別のポートへ振り分ける」。マップごとで、既定は切)。 +SC-88・SC-88Pro の曲は、ポート A からエクスクルーシブ `50 xx xx` で B 群のパートを設定し、CHANNEL MSG RX PORT(`00 01 1x`)で B 群のパートにポート A のチャンネルを受けさせる。XG の曲は `08 pp xx` のパート番号 16 以降でポート B 以降のパートを指す。各ポートに 16 パートの音源を 1 台ずつつないだ機材では、どれもそのままでは届かない。 + +- **マップの設定にした。** ポートが 1 台の SC-88Pro の 2 つの入力か、別々の 2 台かは、つないだ人にしか分からない(リセットを送るポートと同じ)。SC-88Pro の実機なら `50 xx xx` を自分で受けるので、分けてはいけない。 +- **切っているときはチェーンに入れない。** 入れたまま素通しにはしない。分割の状態を追うコードが、切っている人の演奏に一切関わらないようにするため。 +- 置く場所はエミュレーション層とその初期化の後、代理発音(CTF)の前(`PartSplitter`)。初期化が `50 4x 00` などで B 群に送るものも、分けた先の音源に届く。代理発音はポートごとのパートを追うので、分けた後のものを見る。液晶と演奏モニタはエミュレーション層のものを見るので、表示は分けない。 +- **チャンネルメッセージは、各パートがどのポートのどのチャンネルを受けるかの表で送り先を決める。** RX CHANNEL や RX PORT のエクスクルーシブを音源へ転送するやり方では再現できない。B7 がポート A の ch6 を受ける曲なら、B の音源の ch6 には、ポート A の ch6 を写したものだけを届け、ポート B の ch6 は届けてはいけないが、音源には届いたメッセージがどのポートから来たかを見分ける手段が無い。そこで RX CHANNEL・RX PORT は表に書き取って音源へは送らず、受けるパートが見つかったチャンネルメッセージを、そのパートを受け持つポートの、そのパート本来のチャンネルへ送る。表が初期値のままなら素通しと同じになる。 +- **GS は SC-88Pro の取扱説明書(「Individual Parameter Transmission」のアドレスの表)に従う。** + - `5x xx xx` は受けたのと反対側のパート群なので、相方のポート(A と B、C と D、E と F)へ `4x xx xx` にして送る。 + - PATCH COMMON(`40 00 xx`〜`40 0F xx`。マスター・GS Reset・エフェクト)は、MODE-1(シングルモジュールモード)なら 32 パート共通なので相方にも送る。MODE-2 ならそのポートだけ。どちらのモードかは System Mode Set(`00 00 7F`)で追い、来るまでは初期値の MODE-1 とする。 + - MODE-1 では、`50 00 xx`〜`50 0F xx`(相方の群の PATCH COMMON)は落とす。アドレスの表でこのブロックは「MODE-1 では使えない」灰色になっている(SC-88Pro の取扱説明書 193 ページ「Address Block map」)。 + - System Mode Set は 16 パートの音源には意味が無い(SC-55 は無視する)ので、両方のポートへの GS Reset に置き換える。 + - GS Reset は RX CHANNEL を戻すが RX PORT は戻さない。RX PORT はシステムパラメータで、System Mode Set でだけ戻る。 +- **XG はパート番号でポートを決める。** MU では、パート番号がどのポートから来たかによらずパートを指す。パート 16〜31 はポート B、32〜47 は C。パートに属さないもの(XG System On、エフェクト、ドラムセットアップ)は機械全体のものなので、ポート A〜D のすべてへ送る。インサーションエフェクトとバリエーションを掛けるパートは、そのパートのポートへだけ番号を直して送り、ほかのポートには OFF を送る。 +- 状態は曲ごとに作り直し、曲の途中から前へ戻したときも初期値に戻す。分けた先の音源は SC-88 の電源を入れ直したのと同じ状態から曲を始める。 + ## ドロップ再生 曲やフォルダをウィンドウへ落とすとプレイリストに入り、**落とした先頭の曲から演奏が始まる**(`AutoDropPlay`。既定で有効、環境設定で切れる)。リストの先頭ではなく落とした先頭から始めるのが要点で、ドロップは「これを聴かせろ」という指示だから。 diff --git a/README.ja.md b/README.ja.md index 0b41eb1e..fc4fe2a7 100644 --- a/README.ja.md +++ b/README.ja.md @@ -79,6 +79,7 @@ TMIDI Player の定義ファイルを読み込むと、TMIDI Player と同じ** - **出力音源**には、そのポートの先につないでいる音源の機種を選びます。 エミュレーションと、曲の前に送るリセットに使われます。 - **リセット**に印を付けたポートへは、曲の前に出力音源のリセット(GS Reset、XG System On など)を送ります。 +- **パートを16ずつ別のポートへ振り分ける**は、各ポートに16パートの音源を1台ずつつないでいるときに入れます。SC-88・SC-88Pro の32パートや XG の17番目以降のパートに宛てたメッセージを、そのパートを受け持つポートの音源へ送ります。SC-88・SC-88Pro の実機を2つのポートにつないでいるときは切っておきます。 - **ポートマップ**は複数作れます。機材ごとに作っておくと便利です。 - いちばん上のマップは既定のマップです。消すことはできず、どのマップにも当てはまらない曲はこのマップで鳴ります。 - マップに**対象音源**を登録しておくと、その音源向けの曲はそのマップで鳴ります。 diff --git a/README.md b/README.md index 0d242bb9..b9baa758 100644 --- a/README.md +++ b/README.md @@ -78,6 +78,9 @@ In **Settings → Port Map Settings...**, assign MIDI devices to ports A to F. - For **Module**, choose the model of the module connected at the other end of that port (the output module). It is used for emulation and for the reset sent before each song. - Ports with **Reset** checked are sent the output module's reset (GS Reset, XG System On and so on) before each song. +- Turn on **Distribute parts over other ports, 16 each** when each port leads to its own 16-part module. + Messages for the 32 parts of an SC-88 or SC-88Pro, or for XG parts 17 and up, are then sent to the module on the port that plays that part. + Leave it off when the ports lead to the two inputs of a real SC-88 or SC-88Pro. - Several **port maps** can be made. Making one for each set of equipment is handy. - The top map is the default map. It cannot be deleted, and songs no other map fits are played with it. - Add **Target Modules** to a map, and songs for those modules are played with that map. diff --git a/src/Glosa.App/Services/AppSettings.cs b/src/Glosa.App/Services/AppSettings.cs index d85b5113..40369ce3 100644 --- a/src/Glosa.App/Services/AppSettings.cs +++ b/src/Glosa.App/Services/AppSettings.cs @@ -53,6 +53,19 @@ public sealed class PortMap /// /// THRU, no emulation, is what a map with nothing said about it plays as. public string UseModule { get; set; } = "THRU"; + + /// + /// Whether each port leads to a 16-part machine of its own, so a song's parts beyond 16 + /// are laid out over the ports (). + /// + /// Off for a 32-part machine on two ports, which takes them as they are. + public bool SplitParts { get; set; } + + /// + /// The most bytes a second handed to each of this map's ports, for hardware that cannot + /// keep up. 0 is unlimited. + /// + public int TransferRate { get; set; } } /// One of the words a song is detected from, and whether it is searched. @@ -209,12 +222,6 @@ public sealed class AppSettings /// The priority of the thread that sends the song. public PlaybackPriority Priority { get; set; } = PlaybackPriority.High; - /// - /// The most bytes a second handed to each port, for hardware that cannot keep up. 0 is - /// unlimited. - /// - public int TransferRate { get; set; } - /// Whether stopping also resets the output devices, besides All Notes Off. public bool UseMidiOutReset { get; set; } = true; diff --git a/src/Glosa.App/Services/PlayerService.cs b/src/Glosa.App/Services/PlayerService.cs index f44d9fae..f7f740c0 100644 --- a/src/Glosa.App/Services/PlayerService.cs +++ b/src/Glosa.App/Services/PlayerService.cs @@ -18,10 +18,11 @@ public readonly record struct ToneMapChoice(ToneMap Maps, byte Map, IReadOnlyLis /// /// /// The chain is the one the console harness builds: -/// Sequencer → EmulationFilter → CapitalToneFallback → PortSink → IMidiOutput. The -/// filter is always in it, even with no DEF loaded, because the panel state the display reads -/// lives there. The fallback is always in it too, and does nothing until it is given a -/// machine's tables (). +/// Sequencer → EmulationFilter → [PartSplitter] → CapitalToneFallback → PortSink → IMidiOutput. +/// The filter is always in it, even with no DEF loaded, because the panel state the display +/// reads lives there. The fallback is always in it too, and does nothing until it is given a +/// machine's tables (). The splitter is in it only for a port map +/// that asks for it (). /// public sealed class PlayerService : IDisposable { @@ -43,11 +44,14 @@ public sealed class PlayerService : IDisposable private readonly Lock _devices = new(); private readonly PortSink _ports; + /// The ports, behind the Capital Tone Fallback. Kept from song to song. + private readonly CapitalToneFallback _fallback; + /// - /// What reaches the machines: the ports, behind the Capital Tone Fallback. The emulation - /// layer sends here, and so does the initialisation. Kept from song to song. + /// What reaches the machines: , or a in + /// front of it. The emulation layer sends here, and so does the initialisation. /// - private readonly CapitalToneFallback _fallback; + private volatile IEventSink _machines; private EmulationFilter _filter; private DefDocument? _definition; @@ -55,7 +59,8 @@ public PlayerService() { _ports = new PortSink(_outputs); _fallback = new CapitalToneFallback(_ports); - _filter = new EmulationFilter(_fallback, new EmulationSettings(), new PatchMapSet()); + _machines = _fallback; + _filter = new EmulationFilter(_machines, new EmulationSettings(), new PatchMapSet()); Options = new PlaybackOptions(); Sequencer = new Sequencer(_filter, Options, Backends.Timer); // Recomposer data has its endless loops played out as it is read, so the setting @@ -77,7 +82,12 @@ public PlayerService() /// thread allowed to send while a song is going. An output that refuses is treated as /// any other send that fails there. /// - private void SendInitAgain() => MidiScript.Run(_init, _fallback); + private void SendInitAgain() + { + IEventSink machines = _machines; + if (machines is PartSplitter splitter) splitter.Reset(); + MidiScript.Run(_init, machines); + } public PlaybackOptions Options { get; } @@ -281,10 +291,21 @@ public void UseInit(IReadOnlyList actions, ToneMapChoice? map = nu EmulationSettings settings = map is { } choice ? choice.Maps.Settings(choice.Map) ?? new() : new(); - UseFilter(new EmulationFilter(_fallback, settings, new PatchMapSet())); + UseFilter(new EmulationFilter(_machines, settings, new PatchMapSet())); EmulationLabel = "(no definition)"; } + /// + /// Puts a part splitter in front of the machines, a new one for the song being set up, or + /// takes it out. Before the emulation layer is built (, + /// ), which sends to it. + /// + public void UseSplit(bool split) + { + Sequencer.Stop(); + _machines = split ? new PartSplitter(_fallback) : _fallback; + } + /// /// Has the Capital Tone Fallback judge program changes by a machine's tables, or stop /// when is null. Takes effect with the song being set up. @@ -393,9 +414,10 @@ private void RestoreMapsOnTheWayOut() /// and is done on the transport's thread as the song is set up. /// /// Past the emulation layer: the initialisation is its own output and must not be run - /// back through it. Through the Capital Tone Fallback, which has to see the resets and - /// the map the parts are put on as the machine does. A refusal is returned rather than - /// thrown: the emulation is in place either way, and the caller decides what to tell. + /// back through it. Through the part splitter and the Capital Tone Fallback, which have to + /// see the resets and the map the parts are put on as the machine does. A refusal is + /// returned rather than thrown: the emulation is in place either way, and the caller + /// decides what to tell. /// public string? SendInit() { @@ -406,7 +428,7 @@ private void RestoreMapsOnTheWayOut() ToneMapChoice? map = _map; RestoreMaps(map is { Maps.Lasting: true } chosen ? DevicesOn(chosen.Ports) : []); - MidiScript.Run(_init, _fallback); + MidiScript.Run(_init, _machines); RememberMaps(map); return null; } @@ -427,7 +449,7 @@ public void ApplyEmulation(string useModule, string targetModule) EmulationSetup setup = new EmulationBuilder(_definition) .Build(useModule, targetModule, filterSection: "NONE"); - UseFilter(new EmulationFilter(_fallback, setup.Settings, setup.Patches)); + UseFilter(new EmulationFilter(_machines, setup.Settings, setup.Patches)); EmulationLabel = $"[{setup.Resolution.Key}] {setup.Resolution.Commands}"; _init = setup.InitActions; diff --git a/src/Glosa.App/Strings.Designer.cs b/src/Glosa.App/Strings.Designer.cs index 97eff873..12f6114b 100644 --- a/src/Glosa.App/Strings.Designer.cs +++ b/src/Glosa.App/Strings.Designer.cs @@ -1881,6 +1881,24 @@ public static string PortMapResetOf { } } + /// + /// Looks up a localized string similar to Distribute parts over other ports, 16 each. + /// + public static string PortMapSplitParts { + get { + return ResourceManager.GetString("PortMapSplitParts", resourceCulture); + } + } + + /// + /// Looks up a localized string similar to Turn this on when each port of this map leads to a 16-part sound module of its own. Messages for the 32 parts of an SC-88 or SC-88Pro, or for XG parts from the 17th on, are sent to the module on the port that takes that part. Leave it off when a real SC-88 or SC-88Pro is connected to two ports.. + /// + public static string PortMapSplitPartsTip { + get { + return ResourceManager.GetString("PortMapSplitPartsTip", resourceCulture); + } + } + /// /// Looks up a localized string similar to Target Modules. /// @@ -1908,6 +1926,15 @@ public static string PortMapTitle { } } + /// + /// Looks up a localized string similar to Transfer rate limit. + /// + public static string PortMapTransferRate { + get { + return ResourceManager.GetString("PortMapTransferRate", resourceCulture); + } + } + /// /// Looks up a localized string similar to Module. /// @@ -2448,15 +2475,6 @@ public static string SettingsTooNew { } } - /// - /// Looks up a localized string similar to Transfer rate limit. - /// - public static string SettingsTransferRate { - get { - return ResourceManager.GetString("SettingsTransferRate", resourceCulture); - } - } - /// /// Looks up a localized string similar to Trim extra spaces in titles. /// diff --git a/src/Glosa.App/Strings.ja.resx b/src/Glosa.App/Strings.ja.resx index fa4d864d..2b95fdff 100644 --- a/src/Glosa.App/Strings.ja.resx +++ b/src/Glosa.App/Strings.ja.resx @@ -663,6 +663,15 @@ define.override.yaml を修正するか削除して Glosa を起動し直して このマップのポートに接続されている音源を指定してください。 + + パートを16ずつ別のポートへ振り分ける + + + このマップの各ポートに16パートの音源を1台ずつつないでいるときにチェックを入れてください。SC-88・SC-88Pro の32パートや XG の17番目以降のパートに宛てたメッセージを、そのパートを受け持つポートの音源へ送ります。SC-88・SC-88Pro の実機を2つのポートにつないでいるときは外してください。 + + + 転送レート上限 + ポート {0} @@ -834,9 +843,6 @@ define.override.yaml を修正するか削除して Glosa を起動し直して ファイルの形式がバージョン {0} で、この Glosa が読めるバージョン {1} より新しいです - - 転送レート上限 - タイトルの余分なスペースをカットする diff --git a/src/Glosa.App/Strings.resx b/src/Glosa.App/Strings.resx index 312d85bd..2b1c7685 100644 --- a/src/Glosa.App/Strings.resx +++ b/src/Glosa.App/Strings.resx @@ -666,6 +666,15 @@ Fix or delete define.override.yaml, and restart Glosa. Choose the sound module connected to this map’s ports. + + Distribute parts over other ports, 16 each + + + Turn this on when each port of this map leads to a 16-part sound module of its own. Messages for the 32 parts of an SC-88 or SC-88Pro, or for XG parts from the 17th on, are sent to the module on the port that takes that part. Leave it off when a real SC-88 or SC-88Pro is connected to two ports. + + + Transfer rate limit + Port {0} @@ -837,9 +846,6 @@ Fix or delete define.override.yaml, and restart Glosa. The file is in format version {0}, newer than version {1}, which this Glosa reads - - Transfer rate limit - Trim extra spaces in titles diff --git a/src/Glosa.App/ViewModels/MainViewModel.cs b/src/Glosa.App/ViewModels/MainViewModel.cs index c5a98645..d6e7d4ae 100644 --- a/src/Glosa.App/ViewModels/MainViewModel.cs +++ b/src/Glosa.App/ViewModels/MainViewModel.cs @@ -131,7 +131,6 @@ private void Restore(AppSettings saved) LoopRepeatCount = saved.LoopRepeatCount; Priority = saved.Priority; - TransferRate = saved.TransferRate; UseDefKeywords = saved.UseDefKeywords; DetectionSources.Clear(); foreach (DetectionSourceSetting s in DetectionSourceSetting.Tidy(saved.DetectionSources)) @@ -245,7 +244,6 @@ private string SettingsYaml() _settings.XgPlaysAs = XgPlaysAs; _settings.LoopRepeatCount = LoopRepeatCount; _settings.Priority = Priority; - _settings.TransferRate = TransferRate; _settings.UseMidiOutReset = UseMidiOutReset; _settings.SendAllNotesOffOnStop = SendAllNotesOffOnStop; _settings.CapitalToneFallback = CapitalToneFallback; @@ -810,9 +808,6 @@ partial void OnIsPlayingChanged(bool value) [ObservableProperty] public partial PlaybackPriority Priority { get; set; } = PlaybackPriority.High; - [ObservableProperty] - public partial int TransferRate { get; set; } - [ObservableProperty] public partial bool UseMidiOutReset { get; set; } = true; @@ -1972,6 +1967,8 @@ public void ApplyEmulation(string? target = null, bool twoPorts = false) SoundCanvasTones? tones = CapitalToneFallback ? SoundCanvasTones.Of(UseModule) : null; _player.UseFallback(tones); if (tones is not null) Note(string.Format(Strings.NoteFallbackTables, tones.Model)); + _player.UseSplit(ActiveMap?.SplitParts ?? false); + _player.Options.TransferRateBytesPerSecond = ActiveMap?.TransferRate ?? 0; // With no DEF: the reset define.yaml's initializeType names, and the tone map of the // model the song was written for where the module carries it (ToneMap). @@ -2073,8 +2070,6 @@ partial void OnLoopRepeatCountChanged(int value) partial void OnPriorityChanged(PlaybackPriority value) => _player.Options.Priority = value; - partial void OnTransferRateChanged(int value) - => _player.Options.TransferRateBytesPerSecond = value; partial void OnUseMidiOutResetChanged(bool value) => _player.Options.UseMidiOutReset = value; @@ -2533,6 +2528,7 @@ private void AddPortMap() Ports = new(EditedMap?.Model.Ports ?? []), ResetPorts = [.. EditedMap?.Model.ResetPorts ?? [PortMap.PortKey(0)]], UseModule = EditedMap?.Model.UseModule ?? Thru, + TransferRate = EditedMap?.Model.TransferRate ?? 0, }; EditedMap = Adopt(model); diff --git a/src/Glosa.App/ViewModels/PortMapViewModel.cs b/src/Glosa.App/ViewModels/PortMapViewModel.cs index 40aaa201..1f5ef57c 100644 --- a/src/Glosa.App/ViewModels/PortMapViewModel.cs +++ b/src/Glosa.App/ViewModels/PortMapViewModel.cs @@ -28,6 +28,8 @@ public PortMapViewModel(PortMap map, IReadOnlyList devices, Model = map; Title = map.Title; UseModule = map.UseModule.Length > 0 ? map.UseModule : null; + SplitParts = map.SplitParts; + TransferRate = map.TransferRate; Modules = [.. map.Modules]; Modules.CollectionChanged += (_, _) => Model.Modules = [.. Modules]; _devices = devices; @@ -64,6 +66,16 @@ public PortMapViewModel(PortMap map, IReadOnlyList devices, [ObservableProperty] public partial string? UseModule { get; set; } + /// + /// Whether a song's parts beyond 16 are laid out over the ports (). + /// + [ObservableProperty] + public partial bool SplitParts { get; set; } + + /// The most bytes a second handed to each port (). + [ObservableProperty] + public partial int TransferRate { get; set; } + /// The target modules that hand the outputs to this map. public ObservableCollection Modules { get; } @@ -165,6 +177,10 @@ public void Lay(int index, MidiDeviceInfo? device) partial void OnTitleChanged(string value) => Model.Title = value; + partial void OnSplitPartsChanged(bool value) => Model.SplitParts = value; + + partial void OnTransferRateChanged(int value) => Model.TransferRate = value; + /// /// An empty answer is dropped rather than stored. A combo box clears its selection when /// its list stops containing the chosen item, as on loading a definition that does not diff --git a/src/Glosa.App/Views/PortMapWindow.axaml b/src/Glosa.App/Views/PortMapWindow.axaml index e02515e9..05cfc8e2 100644 --- a/src/Glosa.App/Views/PortMapWindow.axaml +++ b/src/Glosa.App/Views/PortMapWindow.axaml @@ -6,7 +6,7 @@ xmlns:m="using:Glosa.Midi" x:Class="Glosa.App.Views.PortMapWindow" x:DataType="vm:MainViewModel" - Width="630" Height="572" MinWidth="560" MinHeight="420" + Width="630" Height="598" MinWidth="560" MinHeight="420" Title="{x:Static l:Strings.PortMapTitle}"> @@ -111,59 +111,77 @@ - - - - - - - - - - - - - - - - - - - + + + + - -